accessories

We can install your rangehood in the Auckland, Waikato & Bay of Plenty areas. Rangehood Solutions does not support the use of flexible ducting on any of our rangehood installations. We aim to duct all rangehoods with solid galvanised or stainless round 150/125mm diameter tubing. This solid ducting is ideal for long straight runs where a minimum of bends or offsets in the rangehoods ducting run are needed.

When bends or offsets are unavoidable in the ducting run we will use 150/125mm "semi rigid" ducting. This is an aluminium smooth internal bore product which allows high unrestricted airflow around any radius of bend/offset. We can also offer a rectangle PVC boxed ducting for in wall frame or limited space installations. This option is also available in the equivalent of 150/125mm sizes with a variety of rectangle to round adaption fittings, along with horizontal and vertical offset options.

Some advantages of using the high spec ducting products mentioned above over the sub-standard flexible ducting used by some installers are:

All ducting is flame and rodent proof.All ducting has a smooth internal bore allowing a maximum unrestricted airflow from the rangehood fan/motor to the duct outlet.An unrestricted airflow in turn creates a quieter, more efficient performing rangehood at kitchen level.


Semi Rigid Ducting 125/150MM

SEMI RIGID DUCTING 125/150MM $90.00 ( INCLUDES GST )

Solid Galvanised Ducting 125/150MM

SOLID GALVANISED DUCTING 125/150MM $80.00 ( INCLUDES GST ).

Flat Channel Ducting

FLAT CHANNEL DUCTING $80.00 ( INCLUDES GST )

Flexi Ducting 125mm/150mm

FLEXI DUCTING 125mm & 150mm $40.00 ( INCLUDES GST )

Soffit Vent Louvre Outlet

SOFFIT VENT LOUVRE OUTLET $40.00 ( INCLUDES GST )

Wall Vent Weatherproof Cowl

WALL VENT WEATHERPROOF COWL $80.00 ( INCLUDES GST )

Galvanised Roof Cowl

GALVANISED ROOF COWL $50.00 ( INCLUDES GST )

Mansonry Tileflash

MASONRY TILEFLASH $130.00 ( INCLUDES GST )

Iron Flash

IRON FLASH $50.00 ( INCLUDES GST )

Reducer / Expander

REDUCER / EXPANDER $25.00 ( INCLUDES GST )

Mini/Megatube Elbow Adaptor

MINI/MEGATUBE ELBOW ADAPTOR $50.00 ( INCLUDES GST )

Mini/Megatube Inline Adaptor

MINI/MEGATUBE INLINE ADAPTOR $50.00 ( INCLUDES GST )

Mini/Megatube Vertical Bend

MINI/MEGATUBE VERTICAL BEND $50.00 ( INCLUDES GST )

Mini/Megatube Horizontal Bend

MINI/MEGATUBE HORIZONTAL BEND $50.00 ( INCLUDES GST )

Mini/Megatube Channel Connector

MINI/MEGATUBE CHANNEL CONNECTOR $30.00 ( INCLUDES GST )

Flexi Ducting 200mm

Flexi Ducting - 200mm - $70 (Includes GST) 200mm Flexible Rangehood Ducting - available in 6 metre lengths